![]() ![]() You'll also see the sensitivity is definitely received by Windows, as the Saitek driver/software shows the correct partial sensitivity as I move the X and Y roughly halfway. In the same screenshot you'll see the X and Y (top left) instantly crossing the drawing area. ![]() 65535 is the top of an unsigned 16 bit number, and 32767 is the halfway point between it and 0, so it appears to me that there are 3 possible states this application can see my joystick in.Ĭontrarily I tried my rudder and throttle (z rotation on joystick and z axis on thruster) and (as you can see from the below screenshot) I could get fairly concise movements. I've tried out "Joytester 2" - which appears quite popular - and this shows my X and Y as being 65535, 32767 or 0. ![]() The driver/Windows software shows that the variance is definitely there and shows partial movements. After some investigation, it appears a slight touch on my joystick for pitch or roll is resulting in the same as me pulling the joystick to full length It's either at 0% or 100% at any time. Got it from a friend who it was working perfectly for, he just wanted the pro model.Īfter installing drivers and setting up, I found it significantly more difficult to control than my previous Thrustmaster T-Flight.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |